Front Door Refinishing — Huron, Tuscola & Sanilac Counties
Door refinishing strips, repairs, and recoats wood or fiberglass entry doors — typically a multi-coat marine-grade spar urethane on stained wood, or a high-build acrylic urethane on painted doors.
Why front door refinishing projects fail
The failure modes we see most often across the Thumb — and how we prevent each one on every project.
- Polyurethane in direct south-facing sun without UV inhibitors — chalks and flakes inside 2 years.
- Painting over a glossy factory finish without scuff-sanding — peels at the first temperature swing.
- Refinishing in place during high humidity — finish blushes and won't cure hard.
Surface preparation we perform
Prep is the largest single driver of coating lifespan. Every step below is written into every estimate.
- Remove door, hardware, and weatherstripping
- Strip or sand to bare wood / scuff-sand existing paint to 220 grit
- Repair dings and cracks with epoxy wood filler
- Stain or prime, then 2-3 finish coats sprayed in a controlled environment
Products we specify
We quote products we understand, explain the tradeoffs, and document the selected system in writing.
- Sikkens Cetol Door & Window — premium 3-coat exterior wood door system
- Sherwin-Williams Emerald Urethane Trim Enamel — premium door enamel
- Behr Marine Spar Urethane — economical exterior wood clearcoat for stained doors
What it costs
$400–$1,500 per door. Custom mahogany or double-door entries can reach $2,500.
How long it lasts
3–5 years on south-facing stained wood doors; 7–10+ years on painted doors with Emerald Urethane.
Ongoing maintenance
Wash 2x/year. Apply a single maintenance coat of clear on stained doors every 2-3 years to extend lifespan. Painted doors hold longer between recoats.
Front Door Refinishing — Direct Answers
What is front door refinishing?
Door refinishing strips, repairs, and recoats wood or fiberglass entry doors — typically a multi-coat marine-grade spar urethane on stained wood, or a high-build acrylic urethane on painted doors.
Why does front door refinishing fail?
- Polyurethane in direct south-facing sun without UV inhibitors — chalks and flakes inside 2 years.
- Painting over a glossy factory finish without scuff-sanding — peels at the first temperature swing.
- Refinishing in place during high humidity — finish blushes and won't cure hard.
What does front door refinishing cost?
$400–$1,500 per door. Custom mahogany or double-door entries can reach $2,500.
What products should be used for front door refinishing?
- Sikkens Cetol Door & Window — premium 3-coat exterior wood door system
- Sherwin-Williams Emerald Urethane Trim Enamel — premium door enamel
- Behr Marine Spar Urethane — economical exterior wood clearcoat for stained doors
How long does front door refinishing last?
3–5 years on south-facing stained wood doors; 7–10+ years on painted doors with Emerald Urethane.
What preparation is required for front door refinishing?
- Remove door, hardware, and weatherstripping
- Strip or sand to bare wood / scuff-sand existing paint to 220 grit
- Repair dings and cracks with epoxy wood filler
- Stain or prime, then 2-3 finish coats sprayed in a controlled environment
What maintenance is needed for front door refinishing?
Wash 2x/year. Apply a single maintenance coat of clear on stained doors every 2-3 years to extend lifespan. Painted doors hold longer between recoats.
Why property owners across Michigan's Thumb hire us
- Fully insured — general liability and workers' compensation on every job.
- Written scope before work begins — line-item pricing, product spec, and start date in writing.
- Prep-first process — chalking, peeling, moisture, caulk failure, minor drywall repair, and wood movement are addressed before any color goes on.
- Appointment-only office in Bad Axe — most work happens at your home, cottage, barn, or commercial building.
- Serving homes, lake cottages, cabins, barns, decks, and commercial properties across Huron, Tuscola, and Sanilac counties.
Prefer a fast estimate? Call or text (989) 268-7676 with a few photos or a short walkthrough video and we can usually scope most projects the same day.