Dock Refinishing — Huron, Tuscola & Sanilac Counties
Deck staining strips, brightens, and recoats horizontal wood decking with a penetrating or semi-transparent stain that defends against foot traffic, UV, and water absorption.
Why dock refinishing projects fail
The failure modes we see most often across the Thumb — and how we prevent each one on every project.
- Stained over a wet or sealed deck — penetration is blocked, stain peels in months.
- Solid stains over an oil — incompatibility delaminates the next season.
- Skipping the wood brightener step — leaves the lignin closed and stain uptake uneven.
Surface preparation we perform
Prep is the largest single driver of coating lifespan. Every step below is written into every estimate.
- Strip old finish (sodium hydroxide stripper or sand)
- Apply wood brightener (oxalic acid) to neutralize and open grain
- Replace popped fasteners and split boards
- Let dry to ≤15% moisture before staining
Products we specify
We quote products we understand, explain the tradeoffs, and document the selected system in writing.
- Defy Extreme — clear semi-transparent with zinc nano-particle UV blockers
- TWP 1500 Series — long-favored penetrating oil stain, easy maintenance
- Sherwin-Williams SuperDeck Semi-Transparent — wide color range, good Thumb track record
What it costs
$3–$6 per square foot for a strip-and-restain. A 400 sq ft deck typically runs $1,200–$2,400 in the Thumb.
How long it lasts
2–3 years per coat on horizontal deck boards; 4–6 years on vertical railings and skirting.
Ongoing maintenance
Sweep weekly. Wash and reapply a single maintenance coat every 2-3 years instead of a full strip cycle.
Dock Refinishing — Direct Answers
What is dock refinishing?
Deck staining strips, brightens, and recoats horizontal wood decking with a penetrating or semi-transparent stain that defends against foot traffic, UV, and water absorption.
Why does dock refinishing fail?
- Stained over a wet or sealed deck — penetration is blocked, stain peels in months.
- Solid stains over an oil — incompatibility delaminates the next season.
- Skipping the wood brightener step — leaves the lignin closed and stain uptake uneven.
What does dock refinishing cost?
$3–$6 per square foot for a strip-and-restain. A 400 sq ft deck typically runs $1,200–$2,400 in the Thumb.
What products should be used for dock refinishing?
- Defy Extreme — clear semi-transparent with zinc nano-particle UV blockers
- TWP 1500 Series — long-favored penetrating oil stain, easy maintenance
- Sherwin-Williams SuperDeck Semi-Transparent — wide color range, good Thumb track record
How long does dock refinishing last?
2–3 years per coat on horizontal deck boards; 4–6 years on vertical railings and skirting.
What preparation is required for dock refinishing?
- Strip old finish (sodium hydroxide stripper or sand)
- Apply wood brightener (oxalic acid) to neutralize and open grain
- Replace popped fasteners and split boards
- Let dry to ≤15% moisture before staining
What maintenance is needed for dock refinishing?
Sweep weekly. Wash and reapply a single maintenance coat every 2-3 years instead of a full strip cycle.
Why property owners across Michigan's Thumb hire us
- Fully insured — general liability and workers' compensation on every job.
- Written scope before work begins — line-item pricing, product spec, and start date in writing.
- Prep-first process — chalking, peeling, moisture, caulk failure, minor drywall repair, and wood movement are addressed before any color goes on.
- Appointment-only office in Bad Axe — most work happens at your home, cottage, barn, or commercial building.
- Serving homes, lake cottages, cabins, barns, decks, and commercial properties across Huron, Tuscola, and Sanilac counties.
Prefer a fast estimate? Call or text (989) 268-7676 with a few photos or a short walkthrough video and we can usually scope most projects the same day.